UTG PRO 1inch 2PCs High Profile P.O.I Picatinny Rings

Proudly Designed and Made in USA

High Profile P.O.I® (Precision Optics Interface) Rings Have
a 33mm Center Height to Fit Optics with a 1″ Tube, and up to a 65mm Outer
Objective

The Innovative P.O.I® (Precision Optics Interface) Addresses
3 of the Most Critical Areas in Scope Rings –

a) Progressively Machined for a Precise Inner Ring Surface
to Achieve a Seamless Ring-to-Scope Interaction

b) Low Profile and Flush-fitting Locking Side Plate
Controlled by Dual Spring Loaded Guide Rods Interfacing with the Rail with Torx
Screw Locking to Ensure Secure and Repeatable Zero Hold

c) Square-shaped Integral Recoil Stop Interfacing with a
Picatinny Slot via Complete Surface Contact to Eliminate the Possibility of
Forward and Aft Movement from Recoil Vibrations

2 Piece Ring Set, Each Equipped with 4 Top Torx Screws
Designed with a 22mm Ring Width

Designed to Fit on Mil-spec 1913 Picatinny Rail Platforms

Machined from 6061-T6 Aluminium Alloy and 4605 Steel with
Matte Black Hard Coat Anodize

UTG PRO® Original Snag-free Contoured Profile with Reduced
Weight and Size

NOTE: We recommend to tighten the ring top screws with a
torque value of about 25 inch-lb and the side plate screw with torque value of
about 45 inch-lb.

Material: Aluminium/Steel

Weight: 2.8 oz

Pieces: 2

Rail Type: Picatinny

Profile Level: High

Ring Diameter: 1 Inch

Ring Width: 22 mm